Didget Bead in special collaboration with Derek Schuetz ofFidgetThings . The Didget bead is based on Derek’s well recognized character logo. This bead has a fun Minecraft feel as it is the most cube shaped bead yet. It feature cracks on all sides so it really does look like a stone block that could be found in the game. For some variants we added glow in the dark to the mouth.

Don’t have gear to attached it to? No problem check out our optional add-on “Spinner Button Kit” HERE , or the Crafting Caddy our figdetable spin stick.

Half of the Didget beads will be sold here and the other half will be sold at https://www.fidgetthings.com/ So if you don’t see an option available here check the link to FidgetThings!

Specs:

Weight: 38g

Size: approx .70” or 18mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

HyperGlow material is made by Skur Composites in Texas. These thick spacer have a long lasting bright glow.

Sold as singles for $7 each or get a mix pack of all 5 colors (1 of each color) for $5 each.

These are thick and 2 will not fit on our caddy with that already has 2 of our transition beads and 1 character bead. Please take note of their thickness of 1/8”

Size:

OD - 15.8 mm

ID - 6.5mm

Thickness - 3.2mm ( 1/8”)

Ships from New Jersey

More commonly known as a spin stick. This Crafting Caddy is made from brass and has a glass blasted surface finish. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Version 2 has a larger radius on the end pieces making it more comfortable in the hand. The bearings are also glued in, instead of press fit so you can change bearings easier without the need for an arbor press.

Specs:

Weight - 60g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

We aged this caddy and gave it a brushed finished. This gives a contrasting look between dark low areas and brighter high areas.

More commonly known as a spin stick. This Crafting Caddy is made from brass and has a glass blasted surface finish. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Version 2 has a larger radius on the end pieces making it more comfortable in the hand. The bearings are also glued in, instead of press fit so you can change bearings easier without the need for an arbor press.

Specs:

Weight - 60g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

More commonly known as a spin stick. This Crafting Caddy is made from brass and has a glass blasted surface finish. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Fancy Version has 16 BLACK, 4mm SI3N4 Silicon Ceramic Balls permanently pressed into the hole arrays. Not only do they add detail and an attractive look but they also will keep the caddy from rolling on a table and help protect it from scratches.

Specs:

Weight - 60g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

We aged this caddy and gave it a brushed finished. This gives a contrasting look between dark low areas and brighter high areas.

More commonly known as a spin stick. This Crafting Caddy is made from brass and has a glass blasted surface finish. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Version 2 has a larger radius on the end pieces making it more comfortable in the hand. The bearings are also glued in, instead of press fit so you can change bearings easier without the need for an arbor press.

Fancy Version has 16 BLACK, 4mm SI3N4 Silicon Ceramic Balls permanently pressed into the hole arrays. Not only do they add detail and an attractive look but they also will keep the caddy from rolling on a table and help protect it from scratches.

Specs:

Weight - 60g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

This caddy has been darkened and has a color that reminds be of chocolate… yum

More commonly known as a spin stick. This Crafting Caddy is made from brass and has a glass blasted surface finish. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Fancy Version has 16 BLACK, 4mm SI3N4 Silicon Ceramic Balls permanently pressed into the hole arrays. Not only do they add detail and an attractive look but they also will keep the caddy from rolling on a table and help protect it from scratches.

Specs:

Weight - 60g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

More commonly known as a spin stick. This Crafting Caddy is made from grd5 Titanium and has an anti fingerprint surface finish applied to all parts. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Version 2 has a larger radius on the end pieces making it more comfortable in the hand. The bearings are also glued in, instead of press fit so you can change bearings easier without the need for an arbor press.

Specs:

Weight - 34g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

More commonly known as a spin stick. This Crafting Caddy is made from grd5 Titanium and has an anti fingerprint surface finish applied to all parts. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Fancy Version has your choice of:

‍ ‍BLACK, 4mm SI3N4 Silicon Ceramic Balls

‍ ‍ WHITE, 4mm Zirconia ceramic balls

‍ ‍ BLACK/WHITE alternating

The balls are permanently pressed into the hole arrays. Not only do they add detail and an attractive look but they also will keep the caddy from rolling on a table and help protect it from scratches.

Specs:

Weight - 34g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

This is for a mixed pack of 16 rubber spacers. These work great to add accent colors to your bead caddy set up. Being made from rubber they can stretch over a 1/4” shaft easily and double as a lock washer to prevent loosening.

What you get:

Red - 4

Blue - 4

Orange - 4

Green - 4

Size: 15mm Outside Diameter, 6mm Inside Diameter, 1.25mm thick

These beads were designed to make a smooth transition between spin sticks and our character beads. CNC machined from grd5 titanium. Available in 2 finish options, Polished and matte. (matte option matches the finish on our titanium crafting caddy)

*Beads are a hard resin, the term jelly in the title is visual description purposes*

Size: 16mm dia flared out to 19mm dia. by 14mm (.54”) tall

Ships from New Jersey

These beads were designed to make a smooth transition between spin sticks and our character beads. CNC machined from a random pattern resin poured block, and then hand polished. We hand selected and paired two matching beads together for you. While most pairs fall in the “BLEND” category we felt it best to also add a “LIGHT” and “DARK” category as well so there are less surprises when you receive your set of beads.

*Beads are a hard resin, the term jelly in the title is visual description purposes*

Size: 16mm dia flared out to 19mm dia. by 14mm (.54”) tall

Ships from New Jersey

Our Minecraft (cube) style of Cthulhu. Cast in Cupronickel (silver color) or Bronze (gold color) you can choose the between 2 available colors of glow eyes.

Green glow will glow the brightest while the purple glow has a nice reddish color in the daylight.

Cthulhu is a monstrous, ancient cosmic entity from H.P. Lovecraft's horror mythos, described with an octopus-like head, dragon-like body, and wings, representing forces beyond human understanding that drive people mad. Featured in "The Call of Cthulhu," it slumbers in the sunken city of R'lyeh, influencing cultists who await its awakening to reclaim Earth, embodying cosmic horror, humanity's insignificance, and the terror of the unknown

Specs:

Weight: 50g

Size: approx 20mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

If the option you want is not available here please check Fidgetboy’s website https://fidgetboy.com/

Presenting KRANG, (villian from TMNT) in special collaboration with Fidgetboy! A pretty easy task it was, adding Krang in our Minecraft cube style themed beads. This bead features design details on all 6 side. In Fidgetboy fashion we added the classic “ X - “ symbols in the eye balls.

What was not so easy, was glowing this design in a manner that allowed the details in this casting to show. We went with a new encapsulation technique, where we first added glow powder dry around Krang. With pain staking care we brushed the powder off the brain and allowed it to settle in the background before adding clear resin to cover everything. But with this awesome effect there is the inevitable imperfections that appear from trapped gasses in the dry powder. If you look hard enough you may find a trapped bubble or two in the resin or powder. We feel these imperfections were worth the final effect!

Specs:

Weight: 42g

Size: approx .70” or 18mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

Grumpy Bot in special collaboration with Darriel Caston from D Rocket Design . Darriel is an experienced knife designer known for his out of this world Sci-Fi themed designs. Grumpy Bot is no exception. He is a retro 80’s style robot design, that is jamming out to it’s favorite music through his head phones. He even comes complete with his own time traveling flux capacitor, which is visible through an open panel on his backside!

Don’t have gear to attached it to? No problem check out our optional add-on “Spinner Button Kit” HERE , or the Crafting Caddy our figdetable spin stick.

Specs:

Weight: 32g

Size: approx .70” or 18mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

• see additional info below for a video of the spinner button kit in action

In collaboration with Yellowday Energy we present the Skull Scream Cone. This design was based on original artwork by YDE, which features a mash-up of an ice cream cone and a skull. to fit Minecraft theme we converted it to cube form and here are the results! Cast in Cupronickel (silver color) or Bronze (gold color) you can choose the color and finish option that would best match your gear.

Don’t have gear to attached it to? No problem check out our optional add-on “Spinner Button Kit” HERE. This kit will convert the bead into a spinner that is super fun to fidget with. It even makes a nice display stand too!

due to resin curing times please allow up to 4 days for glow beads to ship

(This bead works best with the spinner button using the metal nut and not the plastic washers)

Specs:

Weight: 30g

Size: approx .70” or 18mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

due to a shallow eye design the glow is not as bright and doesn’t last long, but still looks great with a glossy green tint in day time.

Fallout joins Minecraft! We designed this bead based on the T60 Power Armor. Cast in Cupronickel (silver color) or Bronze (gold color) you can choose the color and finish option that would best match your gear.

Don’t have gear to attached it to? No problem check out our optional add-on “Spinner Button Kit” HERE. This kit will convert the bead into a spinner that is super fun to fidget with. It even makes a nice display stand too!

(This bead works best with the spinner button using the metal nut and not the plastic washers)

Specs:

Weight: 30g

Size: approx .70” or 18mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

• see additional info below for a video of the spinner button kit in action

This item is for the bead only (spinner buttons sold separately)

Now anyone can own one of our Nicodemus Skulls! We tried to imagine what our Nico Skull would have looked like if he was a Minecraft character, and this is the result. Cast in Cupronickel (silver color) or Bronze (gold color) you can choose the color and finish option that would best match your gear.

Don’t have gear to attached it to? No problem check out our optional add-on “Spinner Button Kit” HERE. This kit will convert the bead into a spinner that is super fun to fidget with. It even makes a nice display stand too!

Specs:

Weight: 30g

Size: approx .70” or 18mm cube

Hole Size: .251” or 6.4mm

Ships from New Jersey

• see additional info below for a video of the spinner button kit in action

This listing is for the bead only, spinner buttons sold separately

Created Exclusively for SpinningTopTom, these beads are cast in either Bronze ( gold color) or Cupronickel ( silver color). They feature his “STT” logo emerging out of the Pacific Ocean. Can be used as a standalone bead and affixed to your favorite gear with a lanyard or use with out SPINNER BUTTON KIT to add a fidget factor to them.

This listing is for the bead only, spinner buttons sold separately

Specs:

Weight: 36g

Size: approx .78” dia. or 20mm sphere

Hole Size: .25” or 6.4mm

Ships from New Jersey

• see additional info below for a video of the spinner button kit in action

Designed to be used with our minecraft style cube beads.

Machined in aluminum with anti fingerprint finish applied and anodized in various colors. These beads are meant to provide a finished and clean transition from our cube shaped beads to around spin stick. The colors available now match the 2 colors of our aluminum Crafting Caddy.

Sold as a set of 2 parts

Specs:

Height - .54”

Width/dia - .68”sq end / .625 (5/8”) round end

Ships from New Jersey

These were all sold via a lottery drawing in our facebook group. This is a place holder listing to show price.

These caddies were sold via lottery drawing in our Facebook group. This listing is here to show price.

These caddies were sold via lotto drawing in our Facebook Group. This listing is here only as a placeholder to show price.

More commonly known as a spin stick. This Crafting Caddy is made from aluminum and has an anti fingerprint surface finish applied to all parts. One end spins while a decorative nut screws on the opposite end. Extra thread length on the nut end provides more adaptability to fit different stack configurations.

Specs:

Weight - 22g

Bearing - R188 ( press fit )

Diameter - 5/8” ( .625”)

Shaft dia - 5.9mm

Usable bead stack length - 1.67” - 2.00”

Ships from New Jersey

These lanyards are designed to attach you beads to your gear. Made by Duane Rubink of Pocket Trash EDC. They are approx 4.5” long a feature a diamond knot on the end.

Bead NOT included. If using other makers beads with this product there needs to be a precision 0.250” hole driled through. We can not guarantee fit or function of this item with other makers beads as we have not tested them with others.

Convert your bead into a spinner with this kit. Created to provide extra function to our beads. If your expecting long spin times do not buy. If your expecting a perfectly balanced spinner feel do not buy. That being said this is fun option to have to keep your fingers busy with flicks and stops, I personally highly recommend this kit!

Kit includes:

1) two button parts made from stainless steel with machine finish. (25mm Diameter with slight dish shape)

2) two flanged ball bearings. Industry number R144 sized for 1/4” hole and 1/8” shaft

3) two black plastic spacer shim washers. For use with Nico Skull Bead

4) one metal hex nut. For use with other taller beads ( .74”-.82” tall)

See photos for assembly instructions

IMPORTANT FOR FUNCTION: Do not over tighten buttons. For maximum spin times the bead should be able to slide up and down (jiggle) between the buttons slightly. Adjust hex nut as needed for larger beads. See Additional Info below for a detailed video on how to assemble the buttons with a bead.

Ships from New Jersey