The original haptic “clicking” coin. Featuring patented magnet and bearing configuration to produce satisfying bounces between the fingers.
Our limited edition metal stands, designed to hold your most prized Armored Haptic Coin. Never worry about getting that coin you want, skull owners are granted early access to restocks.
A stainless steel Spoked top insert which has a distressed “Battle Black” finish. Wrapped around the insert is an armored Titanium(6Al-4V) shell, that has been color anodized and then tumbled to darken the colors and add a matching distressed finish.
Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.56” ( 40mm) x .38” (10mm) thick
Weight: 66g
Ships from New Jersey
Your choice of either a brass or stainless steel SPOKED top insert Wrapped around the insert is an “armored” Titanium(6Al-4V) shell to offer new styling and protection from drops. All parts have been heavily stone washed.
Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.56” ( 40mm) x .38” (10mm) thick
Weight: 66g
Ships from New Jersey
LIMIT 1 PER ORDER!!!!
Custom artwork done by John Schipp of Harpuahound Studio
This highly detailed alien themed mandala design has been deep engraved and blackened to make the design pop.
Your choice of either a brass or stainless steel SPOKED top insert Wrapped around the insert is an “armored” Titanium(6Al-4V) shell that has been stonewashed to offer new styling and protection from drops.
Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.56” ( 40mm) x .38” (10mm) thick
Weight: 66g
Ships from New Jersey
The Chill Vault was designed to hold 5 standard chill pills from Harpuahound Studio
It is constructed of an anodized aluminum exterior with a molded urethane rubber insert ( not 3D printed) that has been permanently glued in. The case is water proof and has a friction fit lid with an oring. Works best with the artwork side of the pill facing up. The pockets are large enough to hold pills made from silver.
PILLS NOT INCLUDED!
for single pill carry solution check out our smaller case HERE
Size: 2.75” dia X 0.72” thick
Weight: 78g
Ships from New Jersey
Custom designed case to fit a single CHILL PILL from HARPUAHOUND STUDIO.
Black plastic outer clam shell with snap close lid. Custom MOLDED (not 3D printed) silicone insert with friction fit around pill. Rubber loop for hanging.
larger Silver pills will work in this case!
Chill Pill not included
1 pack = 1 case
2 pack = 2 cases
Weight: 8g
Ships from New Jersey
Design inspired by my 6 year old son’s love for Speakerman character. Top shell made from Bronze, bottom shell are made from grade 5 titanium. The angular but flat top surface provides a large pocket area for your thumb to rest in while clicking. Wrapped around the insert is an “armored” Titanium(6Al-4V) shell to offer new styling and protection from drops. Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.56” ( 40mm) x .38” (10mm) thick
Weight: 62g
Ships from New Jersey
Design inspired by my 6 year old son’s love for Speakerman character. Top shell made from Bronze, bottom shell are made from grade 5 titanium. The angular but flat top surface provides a large pocket area for your thumb to rest in while clicking. Machined grooves have been added for styling and grip. Wrapped around the insert is an “armored” Titanium(6Al-4V) shell to offer new styling and protection from drops. Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.56” ( 40mm) x .38” (10mm) thick
Weight: 62g
Ships from New Jersey
Design inspired by my 6 year old son’s love for Speakerman character. The top shell is made from Titanium Damascus (various alloys of titanium forged together). The colors is a result of flame anodizing at various temperatures. The angular but flat top surface provides a large pocket area for your thumb to rest in while clicking. Even the smooth polished version provides more grip than a flat coin. Wrapped around the insert is an “armored” Titanium(6Al-4V) shell to offer new styling and protection from drops. Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.56” ( 40mm) x .38” (10mm) thick
Weight: 50g
Ships from New Jersey
Battle Black Finish: by metal morphosis, is a multi step finish process consisting of sandblasting, acid etching, and stone washing. The “black” does not rub off or make your fingers dark. From my experience it doesn’t really change all that much after years of use
Gyro Glyde is an update to the Spiro Glyde. While Spiro requires constant user input to rotate, Gyro Glyde does not. With the use of a R188 (ball bearing commonly found in spinners) the Gyro Glyde can spin up to 4 min with a single flick of your finger. It is constructed of a stainless steel lower "armored" section and a spinning stainless steel upper section. The top spinner part as been “battle blackened”
Tools required for disassembly - 3mm Allen key or (Hex wrench) Bearing can be easily removed by unscrewing the nut that locks it in place
WEIGHT: 82g
SIZE: 40mm dia X 11mm thick
BEARING: R188
Ships from new jersey
Battle Black Finish: by metal morphosis, is a multi step finish process consisting of sandblasting, acid etching, and stone washing. The “black” does not rub off or make your fingers dark. From my experience it doesn’t really change all that much after years of use
Gyro Glyde is an update to the Spiro Glyde. While Spiro requires constant user input to rotate, Gyro Glyde does not. With the use of a R188 (ball bearing commonly found in spinners) the Gyro Glyde can spin up to 4 min with a single flick of your finger. It is constructed of a stainless steel lower "armored" section and a spinning stainless steel upper section. Both parts have been “battle blackened”
Tools required for disassembly - 3mm Allen key or (Hex wrench) Bearing can be easily removed by unscrewing the nut that locks it in place
WEIGHT: 82g
SIZE: 40mm dia X 11mm thick
BEARING: R188
Ships from new jersey
LIMIT 1 PER ORDER!!!!
Custom artwork done by John Schipp of Harpuahound Studio
This highly detailed alien themed mandala design has been deep engraved and blackened to make the design pop. It is constructed of stonewashed stainless steel parts.
Gyro Glyde is an update to the Spiro Glyde. While Spiro requires constant user input to rotate, Gyro Glyde does not. With the use of a R188 (ball bearing commonly found in spinners) the Gyro Glyde can spin up to 4 min with a single flick of your finger.
Tools required for disassembly - 3mm Allen key or (Hex wrench) Bearing can be easily removed by unscrewing the nut that locks it in place
WEIGHT: 82g
SIZE: 40mm dia X 11mm thick
BEARING: R188
Ships from new jersey
Gyro Glyde is an update to the Spiro Glyde. While Spiro requires constant user input to rotate, Gyro Glyde does not. With the use of a R188 (ball bearing commonly found in spinners) the Gyro Glyde can spin up to 4 min with a single flick of your finger. It is constructed of a stainless steel lower "armored" section and a spinning stainless steel upper section. Both parts have a beat up stone washed finish.
Tools required for disassembly - 3mm Allen key or (Hex wrench) Bearing can be easily removed by unscrewing the nut that locks it in place
WEIGHT: 82g
SIZE: 40mm dia X 11mm thick
BEARING: R188
Ships from new jersey
Gyro Glyde is an update to the Spiro Glyde. While Spiro requires constant user input to rotate, Gyro Glyde does not. With the use of a R188 (ball bearing commonly found in spinners) the Gyro Glyde can spin up to 4 min with a single flick of your finger. It is constructed of a stainless steel lower "armored" section and a brass or Cupronickel upper section that is engraved with the artwork of your choice.
This item will be engraved to your request, please allow up to 3 days for your order to ship.
Tools required for disassembly - 3mm Allen key or (Hex wrench) Bearing can be easily removed by unscrewing the nut that locks it in place
WEIGHT: 120g
SIZE: 48mm dia X 11mm thick
BEARING: R188
Ships from new jersey
click addition info below to see a video demo
Gyro Glyde is an update to the Spiro Glyde. While Spiro requires constant user input to rotate, Gyro Glyde does not. With the use of a R188 (ball bearing commonly found in spinners) the Gyro Glyde can spin up to 4 min with a single flick of your finger. It is constructed of a stainless steel lower "armored" section and a Stone washed Stainless Steel upper that has been flame anodized. To provided extra contrast we rough sanded to coloring off the top surfaces to expose the natural metal color.
**Flame anodizing is not an exact science, while all coins will have a blue/purple fade they are all unique and will not appear exactly as pictured**
Tools required for disassembly - 3mm Allen key or (Hex wrench) Bearing can be easily removed by unscrewing the nut that locks it in place
WEIGHT: 112g
SIZE: 48mm dia X 11mm thick
BEARING: R188
Ships from new jersey
click addition info below to see a video demo
This Haptic Coin is constructed with a titanium lower and titanium upper section. Both parts have been blasted with our premium blend blast mix. (less harsh and brighter than sandblasted) The texture not only increases grip but also helps hide scratches. The full titanium construction with textured finish we consider this the most rugged build yet, that will still look great with use and wear!
This coin does NOT fit inside our leather pouch
Size: 1.89” ( 48mm) x .43” (11mm) thick
Weight: 72g
Ships from New Jersey
This Haptic Coin is constructed of matching Speakerman shaped shells. Both parts have been blasted with our premium blend blast mix. (less harsh and brighter than sandblasted) The texture not only increases grip but also helps hide scratches. The full titanium construction with textured finish we consider this the most rugged build yet, that will still look great with use and wear!
This coin does fit inside our leather pouch
Size: 1.65” ( 42mm) x .43” (11mm) thick
Weight: 64g
Ships from New Jersey
Our latest Haptic Coin form factor, features a new flared brass insert with raised lip to offer improved grip and finger placement. Wrapped around the insert is an “armored” Titanium(6Al-4V) shell to offer new styling and protection from drops. Functions as a typical Haptic maybe even better as the outer shell offers a more ergonomic grip and naturally helps to prevent muting of the clicks when the inner shell is being manipulated.
Size: 1.89” ( 48mm) x .43” (11mm) thick
Weight: 94g
Ships from New Jersey
Both shells are constructed of polished zirconium which has been heat treated to form a scratch resistant black oxidized layer on the surface. The concaved shape leading away from the side walls provides improved grip so that it can easily be rotated and clicked.
This coin does fit inside our leather pouch
Size: 1.65” ( 42mm) x .43” (11mm) thick
Weight: 92g
Ships from New Jersey