wElcome to the lab
We are always experimenting. If we think we are onto something people would get enjoyment from, those item will find its way here to The Lab store. Quantities are always limited in The Lab and there is no guarantee items will come back into stock once sold out. If you see something you must have, purchase it while you still can!
Make your own bubble wallet - free .stl download
MAKE YOUR OWN BUBBLE MONEY SLEEVE - FREE .STL DOWNLOAD
This was not an easy part to print, it took several tries to with settings tweeks to get this to work consistently. Here are some tips...
NinjaFlex fillament only! Cheetah/Semi-Flex does not work
.6mm extrusion width
4 bottom layers
120% extrusion width for first layer only
40 - 45 C bed temp (to prevent warping)
NO BED FAN! (to prevent warping)
Lots of hairspray on bed. I use Garnier Fructis - Extreme Control - Extreme Hold level 5
Try to hide the seam line to the inside near the bend (see picture above)
The open end of the wallet has a base feature that needs to get cut off after printing. This feature was added to help prevent the open end from peeling off the bed. If you get some lift on the open end keep going the wallet should come out ok as long as some of the removable "button" remains on the bed.